Fencing Wagga Wagga

Fence Builders in Wagga Wagga for Homes, Businesses and Rural Blocks

Need a new fence, a replacement or a mix of both? Fencing Wagga Wagga builds boundary, front, pool, security and farm fences across Wagga Wagga and the nearby suburbs.

We start with the ground. Riverina clay moves between wet winters and dry summers, so post depth and footing size matter as much as the panel you pick.

Call +61 483 709 394 or send the quote form. We measure on site and put the price in writing.

  • Measured on site
  • Written scope and price
  • Homes, businesses and farms
  • Old fence removal on request
New charcoal steel boundary fence beside a brick home and lawn in Wagga Wagga
What we build

Types of Fencing We Build in Wagga Wagga

Boundary and Dividing Fences

Boundary and Dividing Fences

Side and rear fences between neighbours are the most common job we quote.

We can talk you through sharing the cost under the NSW Dividing Fences Act before you both sign off.

Front Fences

Front Fences

A front fence sets the look of the street frontage and controls kids and pets.

Low pickets, slats or rendered piers with infill all suit different house styles.

Gates and Side Access

Gates and Side Access

Single, double and sliding gates are hung on posts sized for their weight.

We fit latches that can be locked and leave room for bins and mowers.

Privacy and Screen Fencing

Privacy and Screen Fencing

Screens hide outdoor living areas, bins and pool equipment from view.

We match the height and spacing to how much light and breeze you want through it.

Configurations

Fence Styles and Layouts

Full-Height Boundary

Usually 1.8 m tall for privacy along side and rear lines. Taller fences may need approval, so we check before quoting.

Low Front Frontage

Kept lower to keep sight lines to the street open and to suit the house.

Stepped Runs on Slopes

Panels step down the grade so the top line looks level and the bottom gap stays even.

Mixed Material Fences

Steel down the sides with timber or slats at the front is a common pairing.

Materials

Fencing Materials Compared

Each material suits a different job. The table sets out where each one fits.

OptionCharacteristicsTypical applicationsConsiderations
Colorbond steelPre-painted steel sheet on steel posts and rails.Boundary and side fences in suburbs.Cut edges and scratches need touch-up paint to slow rust.
Treated pine and hardwoodNatural timber palings or slats on timber or steel posts.Front fences and warmer-looking boundaries.Timber moves and greys in the sun, so it needs a coat every few years.
Aluminium slatsLight powder-coated slats that will not rust.Front fences, screens and pool surrounds.Wind load on tall slat runs needs closer post spacing.
Steel mesh and wireChainwire, welded mesh or rural wire on steel posts.Commercial yards and farm paddocks.Strainer posts must be braced well or the wire slackens.
Planning

What Shapes a Fence Job in Wagga Wagga

A few site facts decide the method, the time on site and the price.

Boundary Position

We build on the line you show us. If the line is unclear, a registered surveyor should mark it first.

Underground Services

We request plans through Before You Dig Australia before any hole is dug.

Clay and Drainage

Reactive clay heaves when wet and shrinks when dry. Deeper footings help posts stay plumb.

Heat and Sun

Summer heat fades timber and expands steel. Material choice and fixings allow for that.

How it works

Our Fencing Process

  1. 1

    Call or Send the Form

    Tell us the property, the fence you have now and what you want built.

  2. 2

    Site Measure

    We walk the line, note slopes, trees and gates, and check access for the crew.

  3. 3

    Written Quote

    The quote lists materials, heights, gate hardware, removal and timing.

  4. 4

    Set Out and Posts

    We string the line, dig the holes and concrete the posts in.

  5. 5

    Panels, Gates and Clean-Up

    Infill goes on, gates are hung and adjusted, and we take the offcuts away.

Tools & technique

Equipment and Methods We Use

Good fences come from straight lines and solid footings.

String Lines and Levels

Every run is strung and levelled so post tops sit on a clean line.

Post Hole Augers

Powered augers give clean, full-depth holes even in hard summer clay.

Concrete Footings

Posts are set in concrete and braced until it cures.

Final Check

We test every gate swing and latch before we leave.

Local coverage

Fencing Across Wagga Wagga Suburbs

We work across the city on both sides of the river. These are the suburbs we cover most.

Pricing

What Affects Fencing Cost in Wagga Wagga

We do not publish a set price per metre, because every boundary is different.

Short, flat run with one materialUsually the simplest price to set
Sloping or rocky groundMore digging, stepping and time on site
Old fence to remove firstLabour and tip fees are added to the scope

Your written quote breaks the job into materials, labour, gates and removal so you can compare like with like.

Request a fencing quote
Questions

Fencing FAQ for Wagga Wagga

How long does a new fence take to build?

Most suburban boundary fences take one to three days on site once materials arrive. Concrete needs time to cure before panels or rails go on. Larger rural or commercial runs take longer, and we give you a time frame in the written quote.

Do I need council approval for a fence?

Many standard fences are exempt development in NSW, but height, location, flood zones and heritage items can change that. We check the general rules with you and suggest you confirm with Wagga Wagga City Council where the fence is unusual.

Who pays for a fence between neighbours?

Under the NSW Dividing Fences Act, neighbours usually share the cost of a sufficient dividing fence. We can provide a written quote you can both review before work starts.

Can you remove my old fence?

Yes, for most timber, steel and wire fences. If an old fence is fibro sheeting that may contain asbestos, it must be removed by a licensed asbestos removalist first.

What fence lasts best in the Riverina climate?

Steel and aluminium hold up well to heat with little upkeep. Timber looks warmer but needs a stain or paint coat every few years to stay sound.

Next step

Planning New Fencing in Wagga Wagga?

Tell us what you want fenced and we will measure the line and price it in writing.

Call +61 483 709 394 or send the form.

Free on-site assessment

Request your free quote

Tell us about your property. We’ll respond during business hours.

Is the work urgent?
Your details are kept private.
Fencing explained

How to Pick the Right Fence for Your Property

Start with the job the fence has to do. Privacy, security, pets, pool safety and stock control all point to different builds.

Then think about upkeep. Steel and aluminium need a wash now and then. Timber needs a recoat, and palings may need replacing as they age.

Last, look at the ground. Slopes, tree roots and soft river flats change how posts go in. We tell you what we find on the measure rather than after the job starts.

We will not build over a boundary that is in dispute, and we will not dig without service plans. Those two rules save everyone trouble.

Call Now Free Quote